Shutter Door Roll Forming Machine with PLC Control System

Product Detail

Shutter Door Roll Forming Machine With PLC Control System Introduction

Shutter door forming machine is to produce rolling doors of major equipment, the use of galvanized steel or different colors of color steel or aluminum as a raw material, production of color plate rolling gates brilliant color, do not fade, do not rust, fire cut off, not easy deformation, strength 3 times higher than the aluminum door.







Input Material:	Galvanized Steel And Stainless Steel	Material Of Rollers:	SKD11 Or CR15
Guarantee:	5 Years	Color:	To Be Customized
Hardness Of Rollers:	HRC58~62 Degree	Forming Stations:	13 Stations
Automatic:	Automatic Perforation







In Component Of The Line





No.	Name	Quantity
Main roll former
1	Un-coiler (2 tons ) MANUAL	1
2	roll former	1
3	Hydraulic cutter	1
4	PLC control	1
5	Output table with rollers(6 meters)	1












TECHNICAL DETAILS

Un-coiler

1. Capacity: 2 tons

2. Material: #45 steel quenched

3. Inner diameter: 410~ 580mm




Main roll former

1. Stations: 13

2. Rollers material: CR 15; HRC 60. Chrome coated: 0.03~0.05mm. The Strength in Mpa: 70 TON, 800 MPA

3. Shaft material: Diameter: 50mm, material is #45 steel. Quenched: hot treatment. The strength of the Main Shaft in Mpa:70 tons, 650MPA

4. Bearing brand: FAG Germany

5. Main Motor: 5.5 KW, 380V, 50HZ




CHAMICAL COMPOSITION




	C	SI	MN	P	S	CR	NI	CU	MO	AI	V	B
Shaft	0.450	0.220	0.540	0.027	0.008	0.050	0.020	0.010	0.000	0.009	0.000	0
Rollers	1.00	0.32	0.33	0.011	0.003	1.49	0.05	0.00	0.02	0.041
Cutter	1.57	0.34	0.38	0.022	0.010	11.10	0.18	0.14	0.48
Cut knife	2.04	0.23	0.23	0.020	0.010	11.66	0.12	0.06







PLC Control Cabinet:

1. Touch screen brand: DELTA

2. PLC brand: DELTA

3. Inverter brand: DELTA

4. Main components for low pressure electricity: Schneider Germany

5. Encoder: Omron




Output table

1. Length: 6 meters

2. Drive type: Rollers




CUTTING PLATFORM

1. Cutting type: Hydraulic system

2. Motor: 4KW; 380V; 50HZ

3. Material of cut die: CR12MOV; Quenched; the Strength in MPA: 950









Un-coiler --Pneumatic feeder -- Micro perforation -- Re-coiler

1	Un-coiler (automatic) 2 tons	1
2	Mechanical press machine	1
3	Pneumatic feeder	1
4	Re-coiler (automatic)	1
5	Perforated mould	1




Our Advantages

a. Extensive production experience: we are specialized in roll forming machine with an experience of 10 years.

b. Complete production facilities: owning precision center less grinding machine, straightening machine, fine polishing machine, precision lathe, milling and drilling machine, roller press and other advanced equipments. Our technicians will do regular scheduled maintenance on these machines to guarantee them work well.

c. High quality raw material: we mainly choose raw material from big steel factory, such as TPCO, BAO STEEL, SHA STEEL, which are best and largest raw material manufacturer in China.

d. Strict Physical/Chemical testing procedures: meeting the requirements of the product design and process, providing reliable testing data.

e. Best after-sale service: Over 90% products are sold to the Southeast Asia, Middle East and Europe, and all products are trusted by domestic and foreign customers.